Sản phẩm

CARD NHẬN 5A-75B

Control system parameters
Sending device	Gigabit NIC, S series Sender, Z series Sender, C series Sender, etc
Control area of every card	Full-color: 256*256 Pixels, for special applications the column can be extended to 1024 pixels
Correction area of every card	256*256 Pixels
Cascade control area of the largest regional	65536*65536 pixels
Cascade card number	65536 PCS
Network port exchange	Support, arbitrary use
Synchronization	Nanosecond synchronization between the card and the card

Display Quality
Refresh rate for conventional chip	Static: 6464, up to 16000Hz 1/8 scan: 128128, up to 10000Hz
Serial frequency	0.2MHz-41.7MHz
Gray Level	Maximum 65536 levels
Minimum unit of OE values	8ns, 8ns multiples steps
Gray scale compensation	Each level grayscale compensate separately

Display module compatibility
Chip supports	Support conventional chips, PWM chips, lighting chips and other mainstream chips
PWM chip supports	Support hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc
Scan mode	Conventional mode and high refresh rate mode to support refresh rate multiplied
Scan type	Support static sweep to 1/32 scan
Module Specifications Support	Support 4096 pixels within any row, any column
The direction of the cable	Support route from left to right, from right to left, from top to bottom, from bottom to top
Data Groups	16 RGB data groups
Data folded	Support to fold on the same or opposite direction, which improve refresh rate significantly
Data exchange	16 data groups for any exchange
Module snapshot	Support any pumping point
Data serial transmission	RGB, R8G8B8, R16G16B16, etc in the form of serial

Compatible device and interface type
Communication distance	UTP cable≤140M CAT6 cable≤170M Optic fiber: Single Mode Fiber Transceiver≤20KM Multi-Mode Fiber Transceiver ≤550M (Use RP Repeater to extend unlimited)
Compatible with transmission equipment	Gigabit switch, fiber transceiver, optical switches
DC power interface	Wire terminal
HUB Interface Type	HUB75 (Note: 32 scan with E signal)

Physical parameters
Size	143* 93mm
Input voltage	DC 3.3V-6V
Rated current	0.6A
Rated power	3W
Storage and transport temperature	-50℃ to 125℃
Operating Temperature	-20℃ to 75℃
Body static resistance	2KV
Weight	100g

Monitoring function (in conjunction with mutil-function card)
Monitoring functions	Real time monitoring environment information like temperature, humidity, smog
Remote Control	Support for relay switch to turn on/off the power supply of equipments remotely

Pixel Level Calibration
Brightness calibration	Support
Chromaticity calibration	Support

Other features
Hot backup	Support, from A to B, and loop backup as well
Shaped screen	Support various freeform display, spherical display, creative display, etc. through the data arbitrary offset